Eurosky-T 45 | 2 | 20 T

Controls

•  Direct commands from the spacecraft allow you to perform 2 movements simultaneously.
•  Ground emergency control station.
•  Check valves fitted to all hydraulic cylinders.
•  Control levers with automatic return to rest position. The movements of the entire platform are activated by using levers, located respectively in the following control stations:
  – nacelle: platform control panel
  – turret: platform control panel for emergencies only
  – base: stabiliser control panel
  After having activated any movement, as soon as the lever is released, it automatically returns to the rest position, blocking any accidental movements.

Safety Devices

•  Stabilizer/aerial part interlock: stabilizer lock when the boom is not in the rest position + boom lock if the props do not detect the actual stabilization of the vehicle.
•  Boom and stabilizer lock if cab PTO is not engaged.
•  No lateral outreach limiter required (100% SAFE): the operator can move safely throughout the entire work area without the need for a special device that limits movements in case of danger. Thanks to the special design of our models, EVERY work position reachable with the basket is ALWAYS within the work area.
•  Manually operated emergency pump allows any maneuver in the event of a failure of the main pump, in particular the return to the rest position of the arm and props, it is able to operate even with a flat battery.
•  All movements of the structure are carried out by double-acting hydraulic jacks with double-piloted safety valves that control the flow of oil in and out.
•  Yellow flashing rotating beacon positioned by a magnet on the roof of the vehicle cabin.
•  Indicator light for stabilizers not fully lowered in the cabin.
•  General safety button for emergency shutdown.
•  Thermal protection device for the electrical system.
•  Safety device that prevents the starter motor from engaging while the engine is running.
•  Anti-collision system between arm and cabin to avoid hitting the cabin either laterally or vertically when moving the arm (buzzer and stop).
•  Anti-collision system between the nacelle and the arm to avoid hitting the jib during the lateral rotation of the nacelle to the right or left (buzzer and stop).
•  Load cells: load detection device in the nacelle consisting of 3 load cells and a management board with redundant operation control, acoustic-visual alarm and movement block in the event of overload.

Shipbuilding

•  Carrycot dimensions: L1400xW700xH1100mm
•  Hydraulic rotation of the nacelle: 90°+ 90°
•  Commands that make 2 movements possible at the same time
•  Continuous and gradual automatic levelling of the nacelle with independent hydraulic circuit
•  Turning the vehicle engine on and off from the nacelle
•  Pre-alarm and overload alarm lights in the nacelle
•  Arm centering indicator in rest position
•  230V electrical socket in the nacelle with junction socket in the turret
•  Gravity lock breaker bar
•  Footrest H15cm
•  No. 2 seat belt attachments

Stabilizers

•  No. 4 stabilizers
•  Separate and independent manoeuvring controls for perfect levelling even on uneven terrain
•  Stabilizer enable light

Pumps Power

•  Power take-off
•  Different PTO characteristics depending on the type of carrier vehicle
•  Cabin light for PTO engaged
•  Pump, gear type, flow rate of 60 l/min. with engine at minimum speed
•  Mechanical or electrical engagement
•  Hour meter in the cabin to control the vehicle’s working hours and to verify the frequency of scheduled maintenance

Body

•  Non-slip chequered aluminum floor
•  Ergonomic ladders mounted on the base to facilitate access to the deck and the carrycot
•  Rear bumper
•  Arm support in resting position

Painting

• All metal parts are protected from corrosion, thanks to a high quality painting for frame and aerial platform. Standard color: WHITE / GREEN

Assembly

• Fixing the platform to the vehicle chassis, hydraulic and electrical connections, ballasting if necessary

Warranty

The platform is guaranteed for 12 months from delivery date .
The vehicle is guaranteed by the Manufacturer.

The following are provided for the platform:

• Use and maintenance manual
• Spare parts manual
• Hydraulic and electrical diagrams

Optional

• Emergency electric pump 12/24V
•  Additional magnetic flashing yellow light
•  Adjustable white LED light
•  12/24V electrical socket in the nacelle (required for the 60W headlight)
•  Toolbox to attach to the carrycot
•  N.4 under-prop plates
•  N.2 support grids for n.4 under-prop plates
•  Provision for compressed air-water system
•  Additional 230V electric motor for operations in internal areas
•  Stainless steel watertight cabinet 1100x350x350 mm on the floor
•  Aluminium sides H200mm
•  Sign holder on the floor with 4 compartments
•  Cone holder
•  Wheel wedge
•  Seat belts
•  Reinforced chassis for 4×4 trucks
•  Fiberglass vessel L1400xW700xH1100 mm insulated up to 5000V
•  Long aluminum nacelle L1600xW700xH1100mm
•  Fiberglass vessel long L1600xW700xH1100mm insulated up to 5000V
•  Special color (longer delivery time)
•  Ground mounted hydraulic sockets for the use of high performance hydraulic tools
•  Hydraulic sockets in the nacelle for the use of high-performance hydraulic tools
•  Fire extinguisher (2kg)
•  ENCODER KIT: Possibility to select different work areas based on the basket workload and the crosspiece configurations:
  – complete with all four crosspieces extended
  – partial right with only the two right crosspieces extended
  – partial left with only the two left crosspieces extended