Eurosky Heavy Duty 33|2|16 (18) HQ JIB

Controls

• • 100% hydraulic controls directly from the nacelle to ensure maximum reliability over time and great precision in maneuvers.
  • Emergency control station from the ground.
  • The controls allow you to perform 2 movements simultaneously and obtain greater sensitivity of progressive and gradual maneuvering compared to electro-hydraulic controls as well as avoiding failures of the electrical components resulting from rainy weather, humidity, frequent use, etc.
  • Blocking valves mounted on all hydraulic cylinders.
  • Control levers with automatic return to rest position. The movements of the entire platform are activated through the use of levers, located respectively in the following control stations:
  – nacelle: platform control panel
  – turret: platform control panel for emergencies only
  – base: stabilizer control panel
  After having activated any movement, as soon as the lever is released, it automatically returns to the rest position, blocking any accidental movements.

Safety Devices

• • Stabilizer/aerial part interlock: stabilizer lock when the boom is not in the rest position + boom lock if the props do not detect the actual stabilization of the vehicle.
  • Boom and stabilizer lock if the PTO in the cabin is not engaged.
  • Moment limiter
  • Manually operated emergency pump allows any maneuver in the event of a failure of the main pump, in particular the return to the rest position of the boom and props, it can also operate with a flat battery.
  • All movements of the structure occur via double-acting hydraulic jacks with double-piloted safety valves that control the flow of oil in and out.
  • Yellow flashing rotating beacon positioned via a magnet on the roof of the vehicle cabin.
  • Warning light for stabilizers not completely lowered in the cabin.
  • General safety button in the nacelle and on the ground for switching off in an emergency.
  • Thermal protection device for the electrical system.
  • Safety device that prevents the starter motor from being inserted while the engine is running.
  • Anti-collision system between boom and cabin
  • Anti-collision system between nacelle and boom to avoid hitting the jib during lateral rotation of the nacelle to the right or left (buzzer and stop).

Shipbuilding

• 100% hydraulic controls directly from the nacelle to ensure maximum reliability over time and great precision in maneuvers.
• Ground emergency control station.
• The controls allow you to perform 2 movements simultaneously and to obtain a greater sensitivity of progressive and gradual maneuvering compared to the electro-hydraulic ones as well as avoiding failures of the electrical components resulting from rainy weather, humidity, frequent use, etc.
• For a longer and guaranteed life of the hydraulic system, all the controls that can be operated from the nacelle and all the hydraulic pipes positioned inside the arms that reach the distributor in the turret work at low pressure 25 Bar.
• Check valves fitted to all hydraulic cylinders.
• Control levers with automatic return to rest position. The movements of the entire platform are activated by using levers, located respectively in the following control stations:
  – nacelle: platform control panel
  – turret: platform control panel for emergencies only
  – base: stabiliser control panel

Stabilizers

• 100% hydraulic controls directly from the nacelle to ensure maximum reliability over time and great precision in maneuvers.
• Ground emergency control station.
• The controls allow you to perform 2 movements simultaneously and to obtain a greater sensitivity of progressive and gradual maneuvering compared to the electro-hydraulic ones as well as avoiding failures of the electrical components resulting from rainy weather, humidity, frequent use, etc.
• For a longer and guaranteed life of the hydraulic system, all the controls that can be operated from the nacelle and all the hydraulic pipes positioned inside the arms that reach the distributor in the turret work at low pressure 25 Bar.
• Check valves fitted to all hydraulic cylinders.
• Control levers with automatic return to rest position. The movements of the entire platform are activated by using levers, located respectively in the following control stations:
  – nacelle: platform control panel
  – turret: platform control panel for emergencies only
  – base: stabiliser control panel

Pumps Power

• 100% hydraulic controls directly from the nacelle to ensure maximum reliability over time and great precision in maneuvers.
• Ground emergency control station.
• The controls allow you to perform 2 movements simultaneously and to obtain a greater sensitivity of progressive and gradual maneuvering compared to the electro-hydraulic ones as well as avoiding failures of the electrical components resulting from rainy weather, humidity, frequent use, etc.
• For a longer and guaranteed life of the hydraulic system, all the controls that can be operated from the nacelle and all the hydraulic pipes positioned inside the arms that reach the distributor in the turret work at low pressure 25 Bar.
• Check valves fitted to all hydraulic cylinders.
• Control levers with automatic return to rest position. The movements of the entire platform are activated by using levers, located respectively in the following control stations:
  – nacelle: platform control panel
  – turret: platform control panel for emergencies only
  – base: stabiliser control panel

Body

• 100% hydraulic controls directly from the nacelle to ensure maximum reliability over time and great precision in maneuvers.
• Ground emergency control station.
• The controls allow you to perform 2 movements simultaneously and to obtain a greater sensitivity of progressive and gradual maneuvering compared to the electro-hydraulic ones as well as avoiding failures of the electrical components resulting from rainy weather, humidity, frequent use, etc.
• For a longer and guaranteed life of the hydraulic system, all the controls that can be operated from the nacelle and all the hydraulic pipes positioned inside the arms that reach the distributor in the turret work at low pressure 25 Bar.
• Check valves fitted to all hydraulic cylinders.
• Control levers with automatic return to rest position. The movements of the entire platform are activated by using levers, located respectively in the following control stations:
  – nacelle: platform control panel
  – turret: platform control panel for emergencies only
  – base: stabiliser control panel

Painting

• 100% hydraulic controls directly from the nacelle to ensure maximum reliability over time and great precision in maneuvers.
• Ground emergency control station.
• The controls allow you to perform 2 movements simultaneously and to obtain a greater sensitivity of progressive and gradual maneuvering compared to the electro-hydraulic ones as well as avoiding failures of the electrical components resulting from rainy weather, humidity, frequent use, etc.
• For a longer and guaranteed life of the hydraulic system, all the controls that can be operated from the nacelle and all the hydraulic pipes positioned inside the arms that reach the distributor in the turret work at low pressure 25 Bar.
• Check valves fitted to all hydraulic cylinders.
• Control levers with automatic return to rest position. The movements of the entire platform are activated by using levers, located respectively in the following control stations:
  – nacelle: platform control panel
  – turret: platform control panel for emergencies only
  – base: stabiliser control panel

Assembly

• 100% hydraulic controls directly from the nacelle to ensure maximum reliability over time and great precision in maneuvers.
• Ground emergency control station.
• The controls allow you to perform 2 movements simultaneously and to obtain a greater sensitivity of progressive and gradual maneuvering compared to the electro-hydraulic ones as well as avoiding failures of the electrical components resulting from rainy weather, humidity, frequent use, etc.
• For a longer and guaranteed life of the hydraulic system, all the controls that can be operated from the nacelle and all the hydraulic pipes positioned inside the arms that reach the distributor in the turret work at low pressure 25 Bar.
• Check valves fitted to all hydraulic cylinders.
• Control levers with automatic return to rest position. The movements of the entire platform are activated by using levers, located respectively in the following control stations:
  – nacelle: platform control panel
  – turret: platform control panel for emergencies only
  – base: stabiliser control panel

Warranty

The platform is guaranteed for 12 months from delivery date .
The vehicle is guaranteed by the Manufacturer.

The following are provided for the platform:

• Use and maintenance manual
• Spare parts manual
• Hydraulic and electrical diagrams